re-scaping tank

After over 6 months, I decided to do a deep clean of our little tank and re-scape the entire foundation of the tank. Took more than 3 hours from the deep cleaning to the removal of stains and dirt from the tree barks. I was literally surprised at the amount of dirt accumulated with wooden blocks submerged in water. After a thorough cleaning process, I removed one of the barks and decided to go with only one bark to give a more roomy and wide space for the Neon tetras to swim around. Upon reading somewhere, I learned that Neon tetras are more comfortable with open wide spaces. The half-moon betta is not in the photograph, and it seems to be unwell for the past week or so. I doubt it’s related to the chemistry of the tank, as I’ve been using some new conditioners for curating the water quality in the tank.

3 hours of re-scaping work

I’ve been reading and watching a lot of aqua-scaping tutorials on different layouts possible in a smaller tank and I was inclined to a more simple one as opposed to the seemingly dense option we had previously. After removing the dirt from the soil bed, I filtered them out by removing floating watery dirt with a manual water pump by water cycles of over 8 to 9. Later, I deep cleaned every single element in the aquarium and separated flora which was affected by line algae which were dominant in the aquarium. Netta helped through all the stages. I removed one of the wooden blocks, set up a new tree bark in an inclined position with ferns slowly arranged on the top. Meanwhile, I planted the grass and Japanese Hydrocotyle on the front side of the tank. I hope it will take up a more dense profile as time passes. But now we have a minimal, simple, and much cleaner and roomier tank space, and here’s the final result.

A much more roomier tank. Excuse those flying ferns on the top. More on that below.

One thing what I learned from this whole process is that when we do a deep cleaning for the tank and if there are ferns to be included, they need to be attached to the wooden barks by some means. Either it can be a glue or they can be manually inserted into any holes or spaces available in the bark or by another means. Even though I watered them slowly, I found out that the ferns were floating around after the pump and filter started working. So, I should be taking care of it in the next episode of this whole thing.If you love aquascaping, skim through Story de’aquatics.

I have also written a detailed article on Planted aquariums – How to make them last based on my personal experience of setting everything on my own.
And yes, we love short videos, and here are the ones on those themes
Fluvial Zeal | The Woodland | Neon Gems